Innokin T18E Coils 1.5Ω (Pack of 5) — For Endura T18E & T22E

Innokin T18E Coils 1.5Ω — Pack of 5

Genuine Innokin T18E replacement coils, five per pack. Stainless steel construction with a Japanese organic cotton wick, at 1.5 Ω — the standard resistance these kits ship with, built for mouth-to-lung vaping.

Important: check your device model

These fit the Endura T18E and Endura T22E only.

They do not fit the original Endura T18 or Endura T22, despite the near-identical names. The two generations use different coil threads and are not interchangeable.

Check the device itself — the model is printed on the battery tube. If it doesn't end in E, these are the wrong coils; the original T18 and T22 take Prism T18 coils instead.

How 1.5Ω vapes

A tight, cigarette-style draw with warm vapour and strong flavour, without the clouds of a sub-ohm setup. It's the resistance Innokin ships in the T18E kit, so it's what the device was tuned around.

Works well with 50/50 PG/VG e-liquid at 12-20 mg, nic salts included. High-VG liquid is too thick to wick properly here and will cause dry hits.

Fitting a new coil

• Unscrew the tank from the battery and empty any remaining e-liquid
• Unscrew the old coil from the tank base
• Screw the new coil in — finger-tight, don't force it
• Drip a few drops of e-liquid onto the exposed cotton
• Reassemble, fill, and wait 5 minutes before the first puff

FAQ

How long does a coil last?
Two to three weeks with normal use. Mouth-to-lung coils at low power last considerably longer than sub-ohm ones. Sweetened e-liquids shorten that.

Why does my coil taste burnt straight away?
Priming. The cotton must be wet before the first puff — a few drops directly on it and five minutes' wait solves it.

Can I use nic salts?
Yes. At 1.5 Ω these suit 10-20 mg salts well.

Will these fit my T18 II?
No. The T18 II uses a different coil again. These are for the T18E and T22E only.